ULS Support

The ULS Mirror

This high-quality static mirror system is engineered with the same quality standard as the Mirror Head, using a front surface mirror, with nearly no quality loss of images being deflected to any desired position. Overall, the ULS Mirror has been designed to reduce the amount of space required for projection installations and supports wide angle lenses down to a throw ratio of 0.6:1. It is important to note that the ULS Mirror is “Made in Austria” and can be used with any projector.

Service and Maintenance

NOTE: The ULS Fixture does not contain any serviceable parts.

NOTE: Even though the ULS Fixture unit does not contain any parts that must be serviced, e.g. lubed, oiled or replaced – Service inspection is for general safety and to avoid danger to life - keep service serious!

The operator has to make sure that safety-relating and machine-technical installations are inspected by an expert and skilled person on a regular basis, at least once a year.

  • The following points have to be considered during the inspection:
  • All screws used for installing the devices or parts of the device have to be tightly connected and must not be corroded.
  • There must not be any deformations on housing, fixations and installation spots (ceiling, suspension, trussing).
  • Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.

ULS Installation and Manual

Download the latest manual for the ULS Series